Replace Motor on 20 Inch Pedestal Fan
By Commercial & Industrial Fans | Published: 2026-10-21
Category: How-to Guides
Step-by-step guide to replacing the motor on a 20 inch high velocity pedestal fan, including safety tips and common mistakes.
Quick Answer
Replace the motor on a 20 inch pedestal fan by disassembling the fan, removing the old motor, and installing a compatible replacement like the Motor of HI-FAN-20POF-5BA-1P.
Why Replace the Motor Yourself?
Replacing a fan motor yourself can save the cost of a new fan and extend the life of a reliable model. It also lets you keep using a fan you're already comfortable with.
However, not all fan motors are interchangeable. Always check the part reference number—like HI-FAN-20POF-5BA-1P—to ensure compatibility with your specific fan model.
Step-by-Step Motor Replacement
- Unplug the Fan and Remove the Guard and Blade: Disconnect the fan from power. Remove the front guard by loosening the retaining ring or screws. Take off the fan blade by unscrewing the blade cap or nut. Common mistake: Forgetting to unplug the fan can cause serious injury.
- Remove the Old Motor: Locate the motor housing (usually behind the blade). Unscrew the mounting bracket or bolts that secure the motor. Disconnect the wiring by noting which wires connect where—take a photo for reference. Tip: Label wires with tape to avoid confusion during reconnection.
- Install the New Motor: Mount the new motor (e.g., Motor of HI-FAN-20POF-5BA-1P) in the same orientation. Reconnect wires matching your photo. Secure the motor with the original mounting hardware. Checkpoint: Ensure all connections are tight and no wires are pinched.
- Reassemble the Fan and Test: Reattach the fan blade and front guard. Plug in the fan and test at low speed first. Listen for unusual noises or wobbling. If the fan doesn't start or vibrates excessively, recheck wiring and blade balance.
Replacement Motor Info
- Motor of HI-FAN-20POF-5BA-1P: The Motor of HI-FAN-20POF-5BA-1P is a replacement part for the Tornado 20-inch High Velocity Metal Oscillating Pedestal Fan. Using the correct replacement motor ensures proper fit and safe operation, avoiding electrical or mechanical issues.
Motor of HI-FAN-20POF-5BA-1P
