Back to Blog
Buying Guides 2026-11-20 Commercial & Industrial Fans 0 views

How to Choose a Submersible Pond Pump: GPH, Lift & Pond Size

How to Choose a Submersible Pond Pump: GPH, Lift & Pond Size

Match GPH, lift height, and pond volume to avoid overspending or underperforming. Compare Hexago pumps for real-world sizing.

Start with pond volume and lift, not brand name

Choosing a submersible pond pump comes down to two numbers: how much water you need to move per hour (GPH) and how high that water has to rise (lift height). Pick a pump that matches both, and your waterfall, fountain, or filter will work without wasting electricity. Pick by price alone, and you may end up with too little flow or a pump that struggles to push water uphill.

The Hexago submersible line covers four power levels, from 1800 GPH to 4000 GPH, so most backyard ponds and water features can find a fit. This guide walks through the sizing logic so you can decide which model matches your pond.

Hexago pump lineup at a glance

How to match GPH to pond size

A common rule is to circulate the entire pond volume at least once per hour. For a 2000-gallon pond, that means a pump rated at 2000 GPH or more. But that rating is measured at zero lift. As soon as you add a waterfall or fountain nozzle, the actual flow drops. That is why buying a pump with some headroom is smart.

The Hexago 2700GPH pump, for example, is rated at 2700 GPH at zero lift. If your waterfall rises a certain height, the actual flow will be lower than the rated maximum. The pump's lift height spec (15 ft max) tells you the pump can still push water that high, but the volume will decrease. For a pond around 2000 gallons with a waterfall, the 2700GPH model gives you a comfortable margin.

Lift height is the limiting factor

Lift height is the vertical distance from the pump to the highest point water must reach. A pump that can lift 13 feet (like the Hexago 1800GPH) will not work for a waterfall that exceeds its max lift, no matter how many gallons it moves. Choose a pump whose max lift exceeds your actual lift by at least a foot or two.

The Hexago 4000GPH pump has the highest lift at 21 feet, making it the only choice in this lineup for very tall water features. The trade-off is its 350W power consumption, which is more than double the 150W of the 3100GPH model. If your lift is under 18 feet, the 3100GPH pump can save electricity while still moving plenty of water.

Other features that affect your decision

  • Power cord length: All four Hexago models come with a 33-foot SJTW power cord, which is generous for most backyard setups. No extension cord needed unless your pond is very far from an outlet.
  • Noise level: Each pump is rated below 45 dB, which is quieter than a typical conversation. If your pond is near a patio or bedroom window, this matters more than raw power.
  • Hose size compatibility: The 1800GPH model uses 3/4" to 1" tubing. The 2700GPH and 3100GPH models use 1" to 1-1/4". The 4000GPH model includes a multi-hose adapter for 0.75" to 1.5", plus a 1-3/4" fitting. Check your existing plumbing before buying.
  • Filter and debris handling: All models include a detachable filter, mesh bag, and clamp. The 4000GPH pump also has a pre-filter basket that handles solids up to a quarter inch, which helps in ponds with leaves or larger debris.

The honest trade-offs

There is no single best pump for every pond. The 1800GPH model is the most power-efficient (100W) but limits you to 13 feet of lift and smaller tubing. The 4000GPH model can handle almost any backyard feature but uses 350W and costs more upfront. The 2700GPH and 3100GPH models offer the best balance for most medium ponds.

If you are unsure, estimate your pond volume and measure your waterfall height. Then pick the pump whose GPH and lift both exceed those numbers by a comfortable margin. That margin accounts for friction losses and nozzle restrictions, and it keeps your pump from running at its limit all the time.

Related Articles

Customer Service
Home
Products
Cart
Profile