Start with lift and flow, not the feature list
The Hexago 800GPH is a 60W submersible pump rated for a maximum flow of 800 gallons per hour and a maximum lift height of 8 feet. Those two numbers decide most of the buying question: how high the water must rise from the pump to the outlet, and how much flow your fountain, pond, or aquarium setup can actually use.
The title mentions a 10FT high lift, but the supplied product record states a maximum lift height of 8ft. Treat 8ft as the working limit when you plan a fountain head, waterfall, or statuary outlet. If your discharge point sits higher than that, this pump is not the right choice.
What the Hexago 800GPH is rated to do
- Hexago 800GPH Submersible Pump, Ultra Quiet Water Fountain Pumps with 10FT High Lift, 6FT Power Cord, 3 Nozzles, Durable Water Pump for Fish Tank, Pond Fountains, Aquarium, Statuary, Hydroponics: 60W motor with a maximum flow rate of 800GPH and a maximum lift height of 8ft. These are the core sizing numbers. Match them to your feature height and desired flow before considering nozzles or noise.

Hexago 800GPH Submersible Pump, Ultra Quiet Water Fountain Pumps with 10FT High Lift, 6FT Power Cord, 3 Nozzles, Durable Water Pump for Fish Tank, Pond Fountains, Aquarium, Statuary, Hydroponics - Hexago 800GPH Submersible Pump, Ultra Quiet Water Fountain Pumps with 10FT High Lift, 6FT Power Cord, 3 Nozzles, Durable Water Pump for Fish Tank, Pond Fountains, Aquarium, Statuary, Hydroponics: Ultra-quiet design rated at less than 45 decibels. Useful if the pump will run near a living space, bedroom aquarium, or patio fountain where motor hum matters.
- Hexago 800GPH Submersible Pump, Ultra Quiet Water Fountain Pumps with 10FT High Lift, 6FT Power Cord, 3 Nozzles, Durable Water Pump for Fish Tank, Pond Fountains, Aquarium, Statuary, Hydroponics: cETL Safety Listed with a 6FT power cord. The listing and cord length affect how safely and conveniently you can place the pump relative to an outlet.
Three nozzles, three different water patterns
- 1/2 in outlet adapter: The smallest supplied nozzle. Expect a narrower, more focused stream than the larger adapters, which can suit a small fountain or aquarium return where you want directed flow.
- 5/8 in outlet adapter: A middle option between the narrow and wide adapters. Useful when you want a bit more spread than the 1/2 in nozzle without opening the flow fully.
- 3/4 in outlet adapter: The widest supplied adapter. It generally produces a broader, softer output than the smaller nozzles, which can work well for pond fountains or waterfall feeds where a wider sheet of water is preferred.
Flow control lets you tune the output without swapping parts
A control knob on the pump adjusts flow by rotating the cap, so you can dial the pressure up or down without changing nozzles. That is handy when a fountain splashes too aggressively, when an aquarium return is too strong, or when you want to fine-tune a waterfall without buying extra fittings.
The knob does not change the pump's maximum lift. It changes how much water moves at a given height, so plan the height first and use the knob to tune the look and sound afterward.
Where this pump fits, and where it may not
The Hexago 800GPH is aimed at aquariums, fish tanks, ponds, fountains, waterfalls, water gardens, hydroponic systems, and irrigation. The decision is less about the list and more about whether your feature stays within 8ft of lift and can use up to 800GPH.
- Small pond fountain or statuary: A good match if the outlet is within 8ft of lift and you want adjustable flow with a choice of three nozzle widths. The 800GPH maximum gives you headroom to tune down.
- Aquarium or fish tank return: The quiet rating and flow control suit tank setups where noise and current strength matter. Confirm your tank and livestock can handle the flow at the setting you choose; the supplied record does not give species-specific guidance.
- Tall waterfall or high fountain head: If the discharge point is above 8ft, this pump is outside its rated lift. Look for a pump with a higher maximum lift instead of pushing this one past its limit.
- Large pond or high-flow waterfall: At 800GPH maximum, this is a small-to-mid feature pump. A large pond or wide waterfall usually needs more flow than this model provides.
A practical setup sequence
- Measure the lift: Measure from the pump's resting position to the highest point the water must reach. Keep that number at or below 8ft.
- Choose a nozzle: Start with the 3/4 in adapter for a broader output or the 1/2 in adapter for a more focused stream, then adjust with the flow knob.
- Set the pump on its suction cups: The four suction cups at the bottom help hold the pump in place. Clean the mounting surface and the cups so they grip properly.
- Route the 6FT cord safely: Keep the cord away from standing water and sharp edges, and connect it to a properly protected outlet. The supplied record does not include detailed electrical installation instructions, so follow local code and the pump's own documentation.
- Tune flow and listen: Rotate the control knob until the fountain or return looks and sounds right. If the pump is louder than expected, check that it is fully submerged and that the intake is not blocked.
Cleaning and long-term care
The supplied record says the pump is very easy to clean and that the suction cups help keep it in place. It does not include a detailed cleaning schedule or disassembly procedure, so follow the manufacturer's instructions for your specific setup rather than guessing at intervals.
In practice, a fountain or pond pump benefits from keeping debris away from the intake. If you notice reduced flow at the same knob setting, check the intake and nozzle for buildup before assuming the pump has failed.
The honest trade-offs
At 800GPH and 8ft of lift, this pump is built for small water features, not large ponds or tall waterfalls. The three nozzles and flow knob give you useful flexibility, but they do not increase the rated lift or maximum flow.
The quiet rating is a real advantage for indoor aquariums and patio fountains, but noise depends on installation: a pump vibrating against a hard surface or running partly dry will not stay quiet. Set it on its suction cups and keep it submerged.
If your feature needs more than 8ft of lift or substantially more than 800GPH, this is the wrong pump for that job. If it fits within those limits, the Hexago 800GPH offers adjustable flow, three outlet sizes, and a cETL-listed build at a catalog price of USD 22.04.


